 |
HOME > Products > Cylindrical Grinders > CNC Series |
 |
 |
| |
G27-60CNC |
 Swing over table: 270mm |
| Center distance: 600mm |
| Wheel size: 405mm |
|
| |
G35-60CNC |
| Swing over table: 350mm |
| Center distance: 600mm |
| Wheel size: 405mm |
|
|
|
 Specifications |
| ENM Standard specifications |
G27-60CNC |
G35-60CNC |
| Capacity |
Swing over table |
mm |
270 |
350 |
| Distance between centers |
mm |
600 |
600 |
| Max. workpiece weight |
Center work(kg) |
60 |
| Chuck work(kg) |
20 |
| Wheelhead and feed |
Grinding wheel dimensions |
O.D. × Width × I.D. |
405× (32-50) × 152.4 |
| Wheel speed |
R.P.M. |
1650/1850 |
| Max. wheel circumferential speed |
mm/min |
2000 |
| Traverse length |
mm |
250 |
| Swivel angle |
° |
+/- 15 ° |
| Manual infeed(Ø) |
mm |
0.001,0.01,0.1 |
| Workhead |
Workhead type |
|
Dead/ Live Center |
| Work spindle speed |
R.P.M. |
30-360 |
| Taper No. |
MT |
No.4 |
| Diameter of through hole |
mm |
25 |
| Tailstock |
Taper No. |
MT |
No.4 |
| Spindle stroke |
mm |
32 |
| I.D. Attachment |
Spindle speed |
R.P.M. |
20000 |
| Motor |
kW(HP) |
0.75(1) |
| Table |
Traverse length |
mm |
700 |
| Swivel angle |
Toward operator |
6° |
| Away from operator |
9 ° |
| Manual infeed(Ø) |
mm |
0.001, 0.01, 0.1 |
| Motor |
Wheelhead infeed servo moto |
kW |
AC 1.5KW |
| Table infeed servo motor |
kW |
AC 1.5KW |
| Wheelhead spindle |
kW(HP) |
3.75(5) |
| Workhead spindle |
kW(HP) |
0.4(1/2) |
| Hydraulic pump |
kW(HP) |
0.75(1) |
| Wheelhead Lub. pump |
kW(HP) |
0.1(1/8) |
| Coolant pump |
kW(HP) |
0.2(1/4) |
| Tank capacity |
Wheelhead Lub. tank |
L(Gal) |
24(6) |
| Hydraulic tank |
L(Gal) |
60(15) |
| Coolant tank |
L(Gal) |
80(20) |
| Floor space required |
Length × Width × Height |
mm |
2700 × 1520 × 1650 |
2700 × 1520 × 1650 |
| Weight |
kg |
2200 |
2200 |
|
*All specifications are subject to change without prior notice. |
| |
| Standard Accessories |
| |
CNC control system |
Necessary hand tool and tool box |
| |
Grinding wheel, flange and extractor |
Standard coolant supply unit |
| |
Wheel balancing arbor |
Working lamp |
| |
Tungsten carbide full center (2Pcs) |
Heat exchanger for wheelhead lubricant system |
| |
Lubricant supply unit |
Inverter for workhead |
| |
Diamond dresser holder |
Probe sensor |
| |
Table swiveling angle measuring device |
|
| Optional Accessories |
| |
Internal grinding attachment |
Tungsten carbide half center |
| |
Double-shoe steady rest |
Work rest (2Pcs) |
| |
Scroll chuck and plate (5" or 6") |
Automatic dog set (6Pcs) |
| |
Magnetic chuck and plate (6") |
Hydraulic tailstock |
| |
Magnetic coolant separator (20L or 40L) |
Outer diameter automatic sizing device |
| |
Paper filter (20L or 40L) |
Endface automatic sizing device |
| |
Wheel balancing stand |
Gap and crash control |
| |
Spare wheel flange |
|
|
