 |
HOME > Products > Rubber Rollers Grinding Machines > NC Series |
 |
| |
G30B-55NC |
 Swing over table: 300mm |
| Center distance: 550mm |
| Wheel size: 355 × 250 × 127mm |
|
|
|
 Specifications |
| ENM Standard specifications |
G30B-55NC |
G30B-75NC |
| Capacity |
Swing over table |
|
300 |
300 |
| Distance between centers |
|
550 |
750 |
| Max. workpiece weight |
Center work(kg) |
60 |
| Workhead only(kg) |
20 |
| Wheelhead and feed |
Swivel angle |
+/- |
0 ° |
| Standard wheel dimensions |
O.D. × Width × I.D. |
355 × 250 × 127 |
| Spindle speed |
R.P.M. |
1450~2100 |
| Traverse length |
|
250 |
| Rapid feed stroke |
|
- |
| Auto infeed |
Max. |
- |
| Min. |
- |
| Handle feed |
M.P.G. |
1µ, 10µ, 100µ |
| Workhead |
Spindle rotary |
|
Live/Dead Center |
| Swivel angle |
Towards operator |
30 ° |
| Away from operator |
90 ° |
| Spindle revolution |
R.P.M. |
90~600 R.P.M. |
| Center taper |
MT |
NO.4 |
| Diameter of through hole |
|
25 |
| Tailstock |
Spindle stroke |
|
32 |
| Center taper |
MT |
NO.4 |
| Table |
Swivel angle |
Towards operator |
4 ° |
| Away from operator |
9 ° |
| Handle distance |
One division |
12.5 |
| Auto-feed/Variable |
|
500~4000/MIN |
| Motor |
Wheel spindle |
HP |
5 |
| Workhead spindle |
HP |
1HP × 4P |
| Hydraulic pump |
HP |
1 |
| Wheel spindle lub.pump |
HP |
1/8 |
| Tank capacity |
Wheel spindle lub.tank |
Liter |
20(5) |
| Hydraulic tank |
Liter |
60(15) |
| Floor space required |
Length × Width |
2700 × 1520 |
3560 × 1520 |
| Height |
1450 |
| Weight |
kg |
2000 |
2300 |
|
*All specifications are subject to change without prior notice. |
|
